iSoKlick supporting exhaust management
iSoKlick.PORTFOLIO
we COVER each pipe!
heat protection
Only with strict adherence to certain parameters and temperatures in the exhaust system, the SCR technology, especially in Tier 4 final systems is used optimally. This gets the textile insulation for engine and exhaust pipe systems a whole new meaning. Was it previously used only as a heat protection, it takes over today an important task in the exhaust gas management and is an indispensable element of the regeneration process.
by using iSoKlick.COVER und iSoKlick.INTEGRAL
we support our business partners to achieve the required standards of the exhaust gas management from the beginning.
heat storage
To ensure the control operation of an SCR system, the exhaust gas temperature about 240 ° C must be achieved for optimal regeneration process. Due to the low exhaust temperatures, especially for new engine systems, you have to make the exhaust aftertreatment these temperatures required by eg heat storage. Between the engine and the SCR unit are often several feet exhaust pipe, which without isolation results in a high thermal loss of the exhaust gas temperature, so there is an insufficient supply at the required temperature for the exhaust gas treatment system. Without so-called "temperature-stroke", eg by heat storage, there will be no controlled regeneration process.
exhaust gas management
If the SCR system does not have the necessary temperature that triggers the chemical process associated with the selective catalytic reduction, which is responsible among other things for the NOx reduction, not the NOx levels can be achieved, for example, in the development stage are required. So it can happen that a poorly regulated, ie under temperate EURO 5 exhaust system significantly inferior results than an optimally functioning EURO 3 exhaust system!
Together with our customers we develop an individual temperature and exhaust gas management.
Tier4-ready!
with iSoKlick.COVER bzw. iSoKlick.INTEGRAL
iSoKlick.COVER & iSoKlick.INTEGRAL
If you opt for the use of iSoKlick.COVER or iSoKlick.COVER, now the full power of iSoKlick insulations will work:
The exhaust pipe is usually between engine and turbine output and SCR input insulated with iSoKlick elements.
On the one hand, the passage of heat energy is reduced by a sheath in order to protect, a part of either on cooling or heating it, on the other hand is the effect of the heat storage, the ability to absorb heat, store and possibly also release it again.
